Fs Tool Highspeed Finishing Compression, 2+2 Flute Speedmaster Series

HIGHSPEED FINISHING COMPRESSION, 2+2 FLUTE SPEEDMASTER SERIES RSF-W DESIGN: • Excellent surface finish is produced by the aggressive cutting edge design and 2 precision ground cutting edges • Superior chipflow and lower heat retention are provided by the special 2 flute design • Exceptionally high feed rates are possible due to the unique HIGHSPEED tool geometry and surface finish • Special submicron, corrosion resistant, extended life carbide provides increased sharpness of the cutting edge, durability and resistance to resin build-up • 30° Helix design with plunging capability APPLICATION: • For smooth finishing cuts at exceptionally high feed rates • Longer tool life when cutting chipboard, plywood and veneered or laminated materials • Excellent finish on hardwoods, softwoods, laminated panels, MDF, chipboard, plywood and solid surface materials • Increased cutting edge life when frequently accelerating/decelerating or performing multiple passes such as “Onion skinning” • Eliminates chipping, fuzzing and tear-out when the end of the upcut/downcut cutting edges are further than 1/16 " from the top and bottom faces of the board • Use a “Mortise” upcut length of 0.188" when cutting rebates, dados or pockets • If part movement is a concern, use a “Mortise” Upcut Length of 0.188" • When possible select a router bit with a longer upcut length to improve chip ejection from the cutting path • For improved dust extraction use with an Aerotech (page FC21)

Click here for the FS TOOL section