Fs Tool Finishing Compression, Z=3+3
Details
FINISHING COMPRESSION, Z=3+3 RSF DESIGN: • Superior surface finish is produced by the 3 precision ground cutting edges • Good chipflow and lower heat retention is provided by the 3 flute design • Fast feed rates are possible due to the high performance tool geometry • Submicron, corrosion resistant, extended life carbide provides increased durability and resistance to resin build-up • 30° Helix design with plunging capability APPLICATION: • For exceptionally smooth finishing cuts • Superior finish on hardwoods, softwoods, laminated panels, MDF, chipboard, plywood and solid surface materials • 3 flute design allows for two cutting edges to be engaged at all times, providing greater stability and reducing run-out • Increased number of bite marks per inch reduces chip size and provides a smooth finish on the core of plywood and particleboards, especially important when edge-banding without pre-miling operations • Eliminates chipping, fuzzing and tear-out when the end of the upcut/downcut cutting edges are further than 1/16 " from the top and bottom faces of the board • Use a “Mortise” upcut length of 0.188" when cutting rebates, dados or pockets • If part movement is a concern, use a “Mortise” Upcut Length of 0.188" • When possible select a router bit with a longer upcut length to improve chip ejection from the cutting path • For improved dust extraction use with an Aerotech (page FC21)
