Dynabrade 64304 18" x 36" (457 mm x 914 mm) Metal Capture Downdraft Station

• Meets These NFPA Requirements: Interlock Pneumatic Valve with Blower and Time-Delay. Tools operate only when Downdraft Table is running; Class II, Group E Explosion-Proof Motor; Aluminum Top for Non-Spark Work Surface; Non-Spark Aluminum Blower on Collector’s Clean-Air Side; Automatic Water Level Control; Vented Sump (Main Tank); Low Voltage Control; Lockable Fused Power Disconnect
• 36" (914 mm) Wide x 18" (457 mm) Deep work surface. Unique tabletop design not offered by other manufacturers. Can be placed on cart for transportability to every work station. Accepts 10" (254) Dual Wheel Grinder/Buffer.
• Water level view port allows operator to set initial water level and monitor level for adjustment. Water reservoir and float valve automatically compensate for water evaporation during use.
• Internal compartments are accessed with no tools required. Includes electric light for enhanced visibility.
• Transparent debris shield available. Stainless steel construction. No paper filters to replace. Grated work surface. Powder coat finish. GFI protection.

For the Dynabrade section Click here

Spec	Value
Work Surface Area Inches	18" x 36" (457 mm x 914 mm)
Voltage	460 V (AC)
Phase	3
Frequency	60 Hz
Amps (A) milliamps (mA)	1.5
Width Inches (mm)	53" (1,346)
Depth Inches (mm)	45" (1,143)
Height Inch (mm)	46" (1,168)
hp (W)	1.0 (746)
Sound Level dB(A)
Vacuum Suction	1,000 (28,317)
Capacity Gallons (Litres)	25 (95)