Techniks 22213-3 CAT40 x ER11 - 3", hex nut
$132.40
In stock
Features
• Balanced to 25,000 RPM at G2.5
• T.I.R. 0.0001" measured from taper to collet pocket
• PowerCOAT nut included for 75% more clamping power
Details
A PowerCOAT nut is included with each holder.
For ER16, and 20 slotted nuts, simply add SLOT-NUT to the end of the part number.
For holders with coolant nut included add -C to the end of the part number.
Product Specifications
Product Specifications
| UNSPSC Code | 27112807 |
| Collet Series | ER11 |
| Body Dia-Workpiece Side (in) | 0.748 |
| Body Dia-Workpiece Side (mm) | 19 |
| Gage Length (in) | 3 |
| Gage Length (mm) | 76.2 |
| Gage Length-Face Contact (in) | 2.87 |
| Gage Length-Face Contact (mm) | 73 |
| Lock Nut Diameter (in) | 0.75 |
| Lock Nut Diameter (mm) | 19.1 |
| Overall Length (in) | 5.68 |
| Overall Length (mm) | 144.3 |
| Material | 8620 Steel |
| Taper | CAT40 |
| Overall Diameter (in) | 2.5 |
| Overall Diameter (mm) | 63.5 |
| Unit of Tool | Metric or Inch |
| Type | V-Flange Collet Chuck |
| Style | Single Ended |
| Capacity Range (in) | 0.019" - 0.28" |
| Capacity Range (mm) | 0.5 - 7.1mm |
| Balanced to | 25,000 RPM at G2.5 |
More Information
| Outside Diameter | .748" |
|---|