Amana 55441 Carbide Tipped 2-Piece Stile and Rail 1-5/8 Dia x 11/16 x 3/16 Radius x 1/2 Inch Shank Set
$147.35
In stock
- Buy 2 for $139.98 each and save 5%
- Buy 5 for $137.04 each and save 7%
- Buy 10 for $132.62 each and save 10%
- Buy 20 for $125.25 each and save 15%
55441 Carbide Tipped 2-Piece Stile and Rail 1-5/8 Dia x 11/16 x 3/16 Radius x 1/2 Inch Shank Set
Details
Our stile and rail sets give you two complete bits, one for doing the rail cuts, one for the stiles. Make cabinet doors and all varieties of frame-and-panel assemblies for furniture and architectural applications. These sets are offered in two configurations, one for working material up to 1" thick, the other for material between 5/8" and 7/8" in thickness. The same three profiles are available in either configuration.
3/4" Material
Bits in this set have profile and groove or rabbet cutters and ball-bearing guide mounted on a 1/2" shank. Respacing of the components should only be necessary – using the provided shims – after the cutters have been resharpened. Use in a table-mounted router. Guide straight cuts with the fence; use the pilot bearing only for cuts on curved rails or stiles.
3/4" Material
Bits in this set have profile and groove or rabbet cutters and ball-bearing guide mounted on a 1/2" shank. Respacing of the components should only be necessary – using the provided shims – after the cutters have been resharpened. Use in a table-mounted router. Guide straight cuts with the fence; use the pilot bearing only for cuts on curved rails or stiles.
More Information
| (B1) | 1/4 |
|---|---|
| info: | # Wings 2 |
| (R) | 3/16 |
| Number of Flutes | 2 |
| Overall Length(L) | 3-1/8 |
| Shank Diameter(d) | 1/2 |
| Length of Cutting Edge(B) | 11/16 |
| Cutting Edge Diameter(D) | 1-5/8 |