Amana tool 54220 Carbide Tipped Classical Architectural Molding 1/8 x 7/8 x 3/8 R x 1 Inch D x 1-11/16 CH x 1/2 SHK Router Bit
$80.10
In stock
- Buy 2 for $76.10 each and save 5%
- Buy 5 for $74.49 each and save 7%
- Buy 10 for $72.09 each and save 10%
- Buy 20 for $68.09 each and save 15%
54220 Carbide Tipped Classical Architectural Molding 1/8 x 7/8 x 3/8 Radius x 1 Inch Dia x 1-11/16 x 1/2 Shank
Details
These bits are designed for cutting base molding, chair, rail, door & window casing, cabinet molding and other millwork!
The profile is laid out vertically, reducing the diameter of the bit. These bits should be used in a 2+ horsepower, table-mounted router, and should be run at reduced speed. Although it has a ball-bearing guide, guiding the cuts with the fence is recommended.
Carbide-Tipped.
More Information
| (R2) | 3/8 |
|---|---|
| (R1) | 7/8 |
| (R) | 1/8 |
| Number of Flutes | 2 |
| Overall Length(L) | 3-1/4 |
| Shank Diameter(d) | 1/2 |
| Length of Cutting Edge(B) | 1-11/16 |
| Cutting Edge Diameter(D) | 1 |
| Material Being Cut | Hard Wood, Hard Plywood, Soft Plywood |
| info | 47706 |