Amana tool 54126 Carbide Tipped Ogee 1/4 x 3/16 R x 1-3/8 D x 11/16 CH x 1/4 Inch SHK w/ Lower Bal Bearing Router Bit
$66.75
In stock
- Buy 2 for $63.41 each and save 5%
- Buy 5 for $62.08 each and save 7%
- Buy 10 for $60.08 each and save 10%
- Buy 20 for $56.74 each and save 15%
54126 Carbide Tipped Ogee 1/4 x 3/16 Radius x 1-3/8 Dia x 11/16 x 1/4 Inch Shank
Details
The ogee is one of the basic shapes used in moldings and decorative profiles. An S-shaped curve, it is convex at the top fairing down into a concave (shown inverted). The ogee bit is characterized by the concave shape coming off the pilot bearing.
Using the optional 3/8" bearing produces a profile with a fillet at the convex end of the curve.
Use in handheld or table-mounted router.
More Information
| (R1) | 3/16 |
|---|---|
| (R) | 1/4 |
| Number of Flutes | 2 |
| Overall Length(L) | 2-5/8 |
| Shank Diameter(d) | 1/2 |
| Length of Cutting Edge(B) | 11/16 |
| Cutting Edge Diameter(D) | 1-3/8 |
| Material Being Cut | Hard Wood, Hard Plywood, Soft Plywood |
| info | 47706 |