Amana 51531 Solid Carbide CNC Spiral for Glass Reinforced Plastic Cutting 1/8 Dia x 1/2 x 1/4 Shank Down-Cut ZrN Coated Router Bit
$41.30
In stock
- Buy 2 for $39.24 each and save 5%
- Buy 5 for $38.41 each and save 7%
- Buy 10 for $37.17 each and save 10%
- Buy 20 for $35.11 each and save 15%
51531 Solid Carbide CNC Spiral for Glass Reinforced Plastic Cutting 1/8 Dia x 1/2 x 1/4 Shank Down-Cut ZrN Coated Router Bit
Details
Fiberglass-impregnated materials are well known for their abrasiveness along with a tendency to fray or shred during machining along with heat created by the router bit.
Amana Tool's response to these challenges is an extremely free-cutting, multi-edge Glass Reinforced Plastic (GRP) multi-flute tool that shears the material without shredding or imparting unnecessary heat.
Excellent for cutting:
Acrylonitrile-Butadiene-Styrene (ABS)
Carbon Fiber Reinforced Polymer (CFRP)
Composite Materials
Coroplast®
Fiberglass
Fiberglass PCB Board
Fiber Reinforced Plastic (FRP)
High Impact Polystyrene (HIPS)
Low Density Polyethylene (LDPE)
Poly (methyl methacrylate) (PMMA)
Polycarbonate (Lexan™)†
Polyethylene Terephthalate Glycol-Modified (PETG / PET-G)
Thermoplastic Polyolefin (TPO)
†Recommendation: Use the slowest suggested feed rates and the shortest bits necessary for cutting and routing Lexan™.
Benefits of ZrN Coating
Creates a harder and tougher cutting edge allows for a prolonged cutting edge life and helps to prevent the build-up of material in the flutes while cutting
High resistance to wear
Extended tool life
Less friction & heat buildup
High resistance to wear
Amana Tool's response to these challenges is an extremely free-cutting, multi-edge Glass Reinforced Plastic (GRP) multi-flute tool that shears the material without shredding or imparting unnecessary heat.
Excellent for cutting:
Acrylonitrile-Butadiene-Styrene (ABS)
Carbon Fiber Reinforced Polymer (CFRP)
Composite Materials
Coroplast®
Fiberglass
Fiberglass PCB Board
Fiber Reinforced Plastic (FRP)
High Impact Polystyrene (HIPS)
Low Density Polyethylene (LDPE)
Poly (methyl methacrylate) (PMMA)
Polycarbonate (Lexan™)†
Polyethylene Terephthalate Glycol-Modified (PETG / PET-G)
Thermoplastic Polyolefin (TPO)
†Recommendation: Use the slowest suggested feed rates and the shortest bits necessary for cutting and routing Lexan™.
Benefits of ZrN Coating
Creates a harder and tougher cutting edge allows for a prolonged cutting edge life and helps to prevent the build-up of material in the flutes while cutting
High resistance to wear
Extended tool life
Less friction & heat buildup
High resistance to wear
More Information
| Coating | ZRN |
|---|---|
| Number of Flutes | 3 |
| Overall Length(L) | 2-1/2 |
| Material Being Cut | Fiberglass |