Amana tool 49120 Carbide Tipped Cove 3/4 R x 2 Inch D x1 CH x 1/2 SHK w/ Lower Bal Bearing Router Bit
$89.74
In stock
- Buy 2 for $85.25 each and save 5%
- Buy 5 for $83.46 each and save 7%
- Buy 10 for $80.77 each and save 10%
- Buy 20 for $76.28 each and save 15%
49120 Carbide Tipped Cove 3/4 Radius x 2 Inch Dia x1 x 1/2 Shank
Details
Use these cove bits to detail the edges of casework, doors and drawers, posts and columns. The cove also makes up one-half of the rule joint used on drop-leaf tables. The other half is the corner-round.
Large-diameter tools must be run at reduced speed. Bits with above 2" diameter are not guaranteed due extreme diameters.Use in hand-held or table-mounted routers.For best results with a large radius cutter, make a preliminary cut with a smaller radius bit or chamfer the workpiece to reduce the amount of stock to be removed in the finish pass. This will produce a smoother finish, and it will prolong tool life.
More Information
| (R) | 3/4 |
|---|---|
| Number of Flutes | 2 |
| Overall Length(L) | 2-7/8 |
| Shank Diameter(d) | 1/2 |
| Length of Cutting Edge(B) | 1 |
| Cutting Edge Diameter(D) | 2 |
| Material Being Cut | Hard Wood, Hard Plywood, Soft Plywood |
| info | 47706 |