The Panelcrafter has easy operation. It glides on a cushion of air (.002/.003"). It is a time saver as it eliminates pre-band sawing. It is constructed of the finest aircraft aluminum. The Panelcrafter 609 shapes arched raised crowns. For clarity, guards area not shown, but are recommended for safe operating. With sufficient power & the proper cutters, pre-band is eliminated. The X & Y movement is made easy by means of a reverse air flow system. You can control the amount of air cushion from .001 thru a series of air jets on the bottom of the unit, eliminating friction.The material is centered with a rack and pinion connected directly to the pin with a knob for easy maintenance free operation. For safety, hands are not near the cutters.

The cope attached to the base with two knob screws for coping cuts. Use a blowout or backer boar cope bar to eliminate blowout.

For rail cuts using a straight template, straight edge of the #2 female template, on a fence or ball bearing rub collar. The cutters are to proper depth, then clamp the material securely with the pneumatic clamping cylinders.

Standard Equipment on 609 & 406: 2 Clamping Cylinders, Air Flotation, Thumb Control On-Off Valve.

Comes with 9 male and 9 female (Independence) Cathedral Style templates: