The original Copecrafter was designed by Reliable to complement the Panelcrafter for the shop that is attempting to obtain higher production. The Copecrafter comes equipped with two clamping cylinders for superior holding.

Two methods of guiding the Copecrafter in a longitudinal plane across the shaper table:
#1: A straight, plexiglas template to guide on the vertical wood shaper fence or rub collar.
#2: A 3/4" wide steel bar that attaches to the base of the copecrafter with two allen cap screws to guide in the miter slot on the shaper table top.

Safety: The material is clamped to the Copecrafter by means of two powerful air cylinders. With all "Crafter" family units, the operator's hands are away from the cutting tools.

Ease of Operation: The air flotation on the bottom of the Copecrafter makes the unit very easy to guide across the shaper table top. Actually converts an ordinary shaper into a sliding table shaper, with the addition of the Copecrafter. Use to cut rails for rapid production.

Each Copecrafter comes with one 2" straight template

Clamping Cylinders: 2

Height of Material Clamping: 1 7/8"