Ballew: Onsrud Cutters - High Speed Steel Double Edge Downcut

Onsrud Cutters - High Speed Steel Double Edge Downcut

These double edge upcut spirals provide a smoother finish cut in trimming, sizing and plunging operations than do single edge tools. They are also recommended when chip flow should be directed down to protect the finish on the top of the material being cut.

Primary Usage: Aluminum and natural woods.

Secondary Usage: Non-abrasive plastics.

High Speed Steel Double Edge Downcut
Tool Number	CED	CEL	Shank Dia.	OAL	Price	Add to Order
40-102	1/8	5/16	1/4	2-5/8	6.41
40-104	3/16	5/8	1/4	2-7/8	6.89
40-106 ONS**	1/4	5/8	1/4	2-3/4	5.99
40-108**	1/4	3/4	1/4	2-3/4	5.56
40-110 ONS	1/4	3/4	1/2	3-1/4	11.64
40-112 ONS**	1/4	1	1/4	3	6.51
40-158**	1/4	1	1/4	3-1/4	7.89
40-114 ONS	5/16	3/4	5/16	3	9.03
40-116	5/16	1	5/16	3	9.31
40-122	5/16	3/4	1/2	3-1/4	12.49
40-124	5/16	1	1/2	3-1/2	13.30
40-132	3/8	1	3/8	3	10.74
40-130*	3/8	1	3/8	3-1/2	12.07
40-134	3/8	1	1/2	3-1/2	13.30
40-136	3/8	1-1/4	1/2	3-3/4	13.30
40-144	1/2	1	1/2	3	13.49
40-138*	1/2	1-1/4	1/2	3-1/4	13.68
40-140	1/2	1-1/2	1/2	3-1/2	14.82
40-142	3/4	1-1/4	1/2	3-1/4	34.49

CED tolerance +/- .005 - EXCEPT ** +.000 - .005
These tools are designed and toleranced for air routers with bearing, +.000 - .006